Siding Calculator

Estimate siding squares for walls and gables minus windows and doors, then get vinyl boxes or fiber cement / engineered wood planks, starter strip, J-channel, corner posts, house wrap and material cost.

Written & reviewed by Michael FairUpdated June 2026Based on U.S. codes & pricingHow we calculate

Siding Calculator: How Many Squares of Siding Do I Need?

Siding is sold by the "square" — 100 square feet of wall coverage — so every estimate starts with the net wall area. Measure the perimeter of the house (add up every wall length), multiply by the wall height from the top of the foundation to the underside of the soffit, then add the gable triangles: half the gable width × its peak height for each one. Subtract windows and doors, add a waste allowance, and divide by 100 to get squares.

Waste matters more than most people expect. A simple rectangular ranch with two gables wastes about 10% in cut-offs; a two-story home with bump-outs, dormers and many corners can easily waste 15% or more because every course has to be cut around openings and every gable course is cut on an angle. Most pros deduct only large openings and treat small windows as part of the waste allowance, which is why this calculator uses a modest 15 sq ft per window and 20 sq ft per door.

Materials differ a lot in how they are packaged. Vinyl comes in boxes that cover two squares (200 sq ft) of double-4" or double-5" panels. Fiber cement lap siding such as 8.25" planks at 7" exposure covers about 7 sq ft per 12 ft plank, so a typical house needs 200–300 planks. Engineered wood lap boards (8" at 6.83" exposure, 16 ft long) cover roughly 9.1 sq ft each. Trim pieces — starter strip, J-channel around windows and doors, and outside corner posts — are ordered by the piece and are easy to forget.

In 2026 US pricing, vinyl siding materials run about $1.00–$2.50 per sq ft, fiber cement $1.75–$4.00, engineered wood $2.25–$4.00, and natural cedar $5–$10. Installed costs are typically $4–$8 per sq ft for vinyl, $7–$14 for fiber cement and $6–$12 for engineered wood, including removal of old siding, house wrap, trim and labor. A 1,500 sq ft wall area therefore lands anywhere from roughly $6,000 for basic vinyl to $20,000+ for fiber cement with full trim packages.

Before ordering, plan the house wrap and flashing. A weather-resistive barrier behind the siding is required by code on most new installations, and window and door heads need flashing or drip caps. If you are re-siding over existing material, check whether furring or foam insulation board will change trim depths. Our roofing and paint calculators can help budget the rest of an exterior refresh, and the curb appeal guide ranks siding among the projects with the best resale return.

How to Use This Calculator

1. Choose Imperial or Metric units. 2. Enter the house perimeter (add up all wall lengths) and the wall height from foundation to eaves. 3. Enter the number of gables plus the width and peak height of a typical gable triangle. 4. Enter the number of windows and doors to deduct. 5. Pick the siding material and a waste factor — 10% for simple boxy homes, 15% for many corners and gables. 6. Optionally enter your price per sq ft. 7. Click "Calculate" for squares, pieces, trim, house wrap and cost.

Understanding Your Result

The net siding area is the actual wall surface to cover after openings. The order quantity adds your waste factor and is what you should buy, shown in squares and in pieces for the chosen material. Starter strip, J-channel, corner posts and house wrap are separate line items because they are ordered by the piece or roll.

Key Formulas

Net Siding Area

Net sq ft = Perimeter × Wall height + Gables × ½ × Gable width × Peak height − (Windows × 15 + Doors × 20)

All dimensions in feet. Opening sizes are average allowances.

Squares to Order

Squares = Net sq ft × (1 + Waste %) ÷ 100

Use 10% waste for simple homes, 12% average, 15% complex.

Pieces

Pieces = Order sq ft ÷ Coverage per piece

Vinyl box = 200 sq ft; fiber cement plank ≈ 7 sq ft; engineered wood board ≈ 9.1 sq ft.

Worked Example

A 50 × 30 ft ranch (160 ft perimeter) with 9 ft walls, two 30 ft wide gables 7.5 ft tall, 12 windows, 2 doors and 4 outside corners, sided in vinyl with 10% waste.

  1. 1Wall area = 160 × 9 = 1,440 sq ft
  2. 2Gables = 2 × ½ × 30 × 7.5 = 225 sq ft
  3. 3Openings = 12 × 15 + 2 × 20 = 220 sq ft
  4. 4Net area = 1,440 + 225 − 220 = 1,445 sq ft
  5. 5Order = 1,445 × 1.10 = 1,590 sq ft = 15.9 squares → 8 boxes of vinyl
  6. 6Starter = 160 ÷ 12 → 14 pieces; J-channel = (12 × 16 + 2 × 17) × 1.1 = 249 ft → 20 pieces; 4 corner posts; house wrap = 1,665 × 1.1 ÷ 1,350 → 2 rolls

Order 8 boxes of vinyl siding (about 16 squares), 14 starter strips, 20 pieces of J-channel, 4 corner posts and 2 rolls of house wrap. At $1.50 per sq ft the siding itself is about $2,384; the same wall in fiber cement would be 228 planks and about $3,974 at $2.50 per sq ft.

Assumptions Behind This Estimate

  • Average window opening 15 sq ft and door 20 sq ft
  • Gables treated as simple triangles (½ × width × height)
  • Vinyl sold in 200 sq ft boxes; fiber cement 7 sq ft per plank; engineered wood 9.1 sq ft per board
  • J-channel: 16 ft per window, 17 ft per door, +10%, 12.5 ft pieces
  • Corner posts 10 ft long; house wrap rolls 9 × 150 ft with 10% overlap
  • Soffit, fascia, window trim boards and labor not included

Siding Materials Compared (2026 US)

Material and installed cost per square foot with typical lifespan.
MaterialMaterial $/sq ftInstalled $/sq ftTypical Lifespan
Vinyl$1.00–$2.50$4–$820–40 years
Fiber cement$1.75–$4.00$7–$1430–50 years
Engineered wood$2.25–$4.00$6–$1225–40 years
Cedar$5–$10$9–$1620–40 years with upkeep

Installed prices include house wrap, standard trim and labor; removal of old siding typically adds $1–$2 per sq ft.

Before You Buy: Practical Advice

  • Measure each wall separately and sketch the house — it is easy to miss a bump-out or a garage wall.
  • Order all siding from one production run so the color matches; keep one spare box for future repairs.
  • Install house wrap shingle-style (upper layers over lower) and tape the seams before any siding goes on.
  • Leave expansion gaps at the ends of vinyl panels and nail in the center of slots, not tight — vinyl must move.
  • Fiber cement is heavy and silica-producing when cut; use a fiber cement shear or a dust-collecting saw outdoors.

Frequently Asked Questions

How do I calculate how much siding I need?

Multiply the house perimeter by the wall height, add each gable triangle (½ × width × peak height), subtract windows and doors, then add 10%–15% for waste. Divide by 100 to get squares. A 50 × 30 ft house with 9 ft walls and two 30 ft gables 7.5 ft tall needs about 1,445 sq ft net, or 15.9 squares with 10% waste.

How many square feet are in a square of siding?

One square of siding covers 100 square feet of wall. Vinyl is usually sold in boxes of two squares (200 sq ft). Fiber cement and engineered wood are sold by the plank, so you divide the order area by the coverage of one plank at its installed exposure — about 7 sq ft for an 8.25" fiber cement plank at 7" exposure.

Should I subtract windows and doors from siding estimates?

Subtract large openings such as doors, patio doors and big picture windows, but do not try to deduct every small window exactly. The siding cut out of window openings largely becomes waste anyway, so most installers deduct about 15 sq ft per average window and keep a 10%–15% waste factor to stay safe.

How much does it cost to side a house in 2026?

Most US homeowners pay $6,000–$18,000 for vinyl and $12,000–$30,000 for fiber cement on a typical 1,500–2,000 sq ft wall area, installed. Material alone is about $1.00–$2.50 per sq ft for vinyl and $1.75–$4.00 for fiber cement. Removal of old siding, rotted sheathing repair, trim and two-story access all push the price up.

How much J-channel do I need for siding?

Allow about 16 linear feet of J-channel per average window (all four sides) and about 17 feet per door (top and both sides), plus 10% for overlaps. J-channel usually comes in 12.5 ft pieces. Also add J-channel along soffits, roof lines and anywhere siding butts into another material.

How much extra siding should I order?

Order 10% extra for a simple one-story home, 12% for an average home, and 15% or more for complex homes with many gables, dormers and corners. Running short mid-job is costly because a later batch of vinyl or pre-finished fiber cement may not match the color exactly, so it is better to return an unopened box.