Crushed Stone & Pea Gravel Calculator
Calculate how many tons, cubic yards or bags of pea gravel, #57 crushed stone, crusher run, decomposed granite or river rock you need — with the right density and compaction for each stone type.
How Much Crushed Stone or Pea Gravel Do I Need? Tons by Stone Type
Not all gravel weighs the same, and not all of it behaves the same once it is spread. Rounded pea gravel stays loose and shifts underfoot, clean #57 crushed stone drains freely, and dense-graded stone like crusher run or decomposed granite contains fines that compact into a hard surface. That difference matters when you order, because the volume you need in place is not the same as the volume you need to buy for a stone that compacts.
The math starts with volume: area in square feet × depth in inches ÷ 12 gives cubic feet, and dividing by 27 gives cubic yards. Suppliers usually sell by the ton, so multiply by the stone's bulk density — about 1.35 tons per cubic yard for pea gravel and river rock, 1.4 for clean crushed stone and decomposed granite, and 1.5 for crusher run. Add around 5% for spreading losses and uneven subgrade, plus another 15% for stones that are compacted with a plate compactor.
Depth is driven by the job. Pea gravel paths and patios want 2–3" over landscape fabric — deeper is harder to walk on. Dog runs and play areas use 3–4". Crusher run base for pavers, sheds and slabs is 4–6" compacted, and driveway bases 6–8" or more. Drainage applications like French drains and dry wells are measured by the trench or pit volume and use clean #57 stone, never crusher run, because the fines clog the voids water needs to move through.
In 2026 US pricing, bulk pea gravel and #57 stone typically cost $35–$65 per ton, crusher run $30–$50, decomposed granite $45–$85 and river rock $60–$150 depending on size and color. Delivery is usually a flat $60–$150 within a set radius. Bagged stone at big-box stores runs $5–$8 per 0.5 cu ft bag, which works out to $270–$430 per cubic yard — three to six times the bulk price — so bags only make sense for very small areas.
A few ordering habits save money. Ask the yard which stone they mean by each name, since "gravel", "3/4 clean" and "#57" are used loosely across regions. Confirm whether they price by the ton or by the yard. Have the truck dump as close to the work area as possible but off the lawn if the ground is soft, and put a tarp under the pile if you are dumping on a driveway or grass you want to keep clean.
Gravel & Stone Spreading Tools
Recommended tools & materials — as an Amazon Associate, we earn from qualifying purchases.
How to Use This Calculator
Understanding Your Result
The highlighted volume and tonnage already include 5% for spreading losses, plus 15% compaction for crusher run and decomposed granite, so they are the numbers to give your supplier. Round up to the yard's minimum increment, usually a half or whole ton.
Key Formulas
Volume
For circles, area = π × (Diameter ÷ 2)².
Tons to Order
Density 1.35–1.5 tons per cu yd by stone type; compaction 0.15 for crusher run and decomposed granite, 0 for clean stone.
Bags
Most bagged landscape stone is sold in 0.5 cu ft bags.
Worked Example
A 10 × 20 ft pea gravel patio, 3" deep, priced at $50 per ton with an $85 delivery fee.
- 1Area = 10 × 20 = 200 sq ft
- 2Volume = 200 × (3 ÷ 12) = 50 cu ft = 1.85 cu yd
- 3Add 5% = 1.85 × 1.05 = 1.94 cu yd
- 4Weight = 1.94 × 1.35 = 2.63 tons
- 5Bagged alternative = 52.5 cu ft ÷ 0.5 = 105 bags
- 6Cost = 2.63 × $50 + $85 = $216
Order about 2.75–3 tons of pea gravel for roughly $220–$235 delivered. The same patio in bags would take 105 bags at $5–$8 each, or $525–$840.
Assumptions Behind This Estimate
- Loose bulk densities: pea gravel and river rock 1.35, #57 and decomposed granite 1.4, crusher run 1.5 tons per cu yd
- 5% extra for spreading losses and uneven ground on every stone type
- Extra 15% compaction allowance for crusher run and decomposed granite only
- Bagged stone sold in 0.5 cu ft bags
- Depth is the finished depth you want after spreading or compaction
Stone Types, Weight & Typical Uses
| Stone | Tons per Cu Yd | Sq Ft per Ton at 3" | 2026 Bulk Price | Best For |
|---|---|---|---|---|
| Pea gravel | 1.35 | 80 | $35–$65/ton | Paths, patios, play areas |
| #57 crushed stone | 1.40 | 77 | $35–$65/ton | Drainage, top layers |
| #3 crushed stone | 1.35 | 80 | $35–$60/ton | Driveway sub-base |
| Crusher run | 1.50 | 72 | $30–$50/ton | Compacted base |
| Decomposed granite | 1.40 | 77 | $45–$85/ton | Natural paths, patios |
| River rock | 1.35 | 80 | $60–$150/ton | Beds, dry creek beds |
Coverage is before compaction and waste allowances. Densities vary by quarry and moisture.
Before You Buy: Practical Advice
- Lay landscape fabric under decorative gravel to stop it sinking into the soil and to slow weeds.
- Install edging before the stone arrives — pea gravel will migrate into lawns and beds without it.
- Spread and compact dense-graded base in 2–3" lifts; a single thick layer will not compact all the way through.
- Ask for a sample or look at the pile in person — color and size names vary widely from yard to yard.
- For drainage jobs, specify "washed" or "clean" stone so you do not receive stone with fines that clog the system.
Frequently Asked Questions
How much does a cubic yard of pea gravel weigh?
Dry pea gravel weighs roughly 2,500–2,900 lb per cubic yard, which is about 1.25–1.45 tons. The calculator uses 1.35 tons per cubic yard as a working figure. Wet stone can weigh noticeably more, so if your supplier sells by weight right after rain you may get slightly less volume per ton.
How many square feet does a ton of pea gravel cover?
At 2" deep, a ton of pea gravel covers about 120 sq ft. At 3" it covers about 80 sq ft and at 4" about 60 sq ft. Coverage halves every time you double the depth, which is why getting depth right is the single biggest factor in how much stone you order.
What is the difference between #57 stone and crusher run?
#57 is clean, angular crushed stone about 3/4" to 1" with the fines washed out, so water flows through it easily — ideal for drainage and top layers. Crusher run (also called ABC, 3/4" minus or dense-grade aggregate) includes stone dust that compacts into a hard, stable base — ideal under pavers, sheds and driveways, but poor for drainage.
Should I use bags or bulk gravel?
Use bags only for jobs under about half a cubic yard, which is roughly 27 bags of 0.5 cu ft. Beyond that, bulk delivery is almost always cheaper even after the delivery fee. A cubic yard of bagged stone typically costs $270–$430 versus $50–$90 in bulk.
How deep should pea gravel be for a patio?
Lay 3" of pea gravel over a compacted crushed-stone or decomposed granite base and landscape fabric. More than about 3" makes the surface feel soft and hard to walk or set furniture on. Use steel, aluminum or paver edging to keep the stones contained.
Why does crusher run need extra for compaction?
Crusher run and decomposed granite contain fines that fill the gaps between larger stones when compacted, so the layer shrinks by roughly 10–20%. If you need 4" of finished compacted base, you need to place about 4.6–4.8" of loose stone. The calculator adds 15% for these stone types.
Helpful Guides
Dive deeper with these related guides to plan your project with confidence.